|
|
Products
 |
Magnum Pro Hydraulic Calibration Pump Model# M-10
- Range: 0 to 10,000psi (700 Bar)
- Patented triple filtration (prevents pump failure caused by dirt)
- Built in pressure relief valve (prevents over pressurizing)
- Shatter proof reservoir
More Details>> |
 |
Magnum Pro Combo Pneumatic Calibration Pump Model# MVP-600
- Range: Vacuum 28"Hg to Pressure 600psi (40Bar)
- Mash proof vent valve (No Needle Valve)
- Dual O-Rings on all pistons
- Patented protective cage around vent knob
More Details>> |
 |
Magnum Pro Low Pressure & Vacuum Calibration Pumps
Model# MP-P (Pressure)
Model# MP-V (Vacuum)
- Ranges: 0 to 28"Hg and 0 to 100psi (7 Bar)
- Recessed vent knob to prevent damage from dropping
- Mash proof vent valve (No Needle Valve)
- Dual O-Rings on all pistons
More Details>> |
 |
Magnum Low Pro
Volume Pressure Chamber
Model# M-80
- Extremely high resolution
- Excellent stability for low pressure calibrations
- Patented optional power drive
- Dual O-Rings
More Details>> |
 |
Magnum Pro Analog Gauges
Model# M-4
- Hermetically sealed / weather proof
- Stainless steel welded case and connection
- Liquid fill able / no kit required
- Protective rubber boot
More Details>> |
 |
CRYSTAL XP2i
- More accurate then most calibrators
- .1% of reading accuracy
- Optional illuminated display
- Ex rated
More Details>> |
 |
Crystal Wide Range Pressure Calibrators
- Accuracy .05% of Reading
- Reads 4-20mA
- Intrinsically Safe
- Rugged - Steel Mill Tough
More Details>> |
 |
Magnum Universal High Pressure Hoses
- 10,000 psi working pressure
- Small in diameter (1/8 OD)
- Zero leakage
- Any length available
More Details>> |
 |
Source 3000
- Range 0 to 3,000psi
- Portable pressure source
- Self-contained nitrogen cylinder
- "Overpressure protection" regulator
More Details>> |
 |
Thommen Digital Differential Pressure Calibrator HM 35 & EX
- Largest Differential Pressure Range Available - 1300psi
- Calibrates Differential Pressures with Static Pressure Present
- Calibrates Absolute Pressure
- High Accuracy
More Details>> |
 |
RTD Simulator & Calibrator
- Simulate/Read RTD sensors
- Several Manufacturers' RTD curves available
- Accurate to ± 0.25°C (± 0.5°F) with 0.1° Resolution
- Guaranteed to work with all Pulsed Instruments
More Details>> |
 |
Thermocouple Simulator & Calibrator
- Direct Temperature Input/Output
- 8 Standard T/C types available
- Accurate to ±0.2°C (±0.4°F) with 0.1° resolution
- EZ-Dial™ Knob
More Details>> |
 |
T/C RTD Dual Calibrator
- Direct replacement to high resolution decade boxes
- Selectable resolution 0.01º or 0.001º
- "Widest" Compatibility with field devices available
More Details>> |
 |
4-20 mA Loop Calibrator
- Step & ramp functions
- Read & source 0-24mA
- Read 0.00 to +/- 30.00 VDC
- Source 0.000 to 24.000 VDC
- High resolution and full 5 digit display
More Details>> |
 |
Frequency Calibrator
- True ± 0.005% of range accuracy
- Six Ranges 1 count per hour to 20.000Khz
- Read 50mV to 120V peak
- Reads signals from Flowmeter pickups, Velocity, and Motion Detectors
More Details>> |
 |
Dewey Air Switch
- Monitor Duct or Air Flow
- No Adjustments - Always Works
- Resists Vibration
- Immune to transient charges
More Details>> |
back to top ^
|
London, UK -
TIME Electronics LTD. has announced that it has finalized an agreement with East Hills Instruments Inc. granting them the exclusive distribution rights for North America. East Hills Instruments Inc. will sell and market TIME instruments under the brand name of Time Electronics U.S.A.
More>>
Looking for a
decade box?
|
